Posted by gmendoza on November 11, 2009 under Tech Tips | 
If you have a video vile that you wish to convert and burn to DVD, you can do so from a Linux command line very easily. We will use FFmpeg for the video conversion, DVDAuthor to create the DVD file system structure, and Growisofs to burn the DVD.
Using FFmpeg, simply specify your input file, the target format, resolution and an output file name. While the following is an over simplified example, it will more than likely work very nicely in most scenarios. The source video file is movie.avi, the target will be formatted for NTSC, and a standard DVD resolution of 720×480 will be used to create a new video file called movie.mpg. There are many additional options that FFMpeg can use to increase quality, so be sure to check out the documentation.
ffmpeg -i movie.avi -target ntsc-video -s 720x480 movie.mpg
Next, you will need to take your new movie.mpg file, and create a DVD file structure that you will burn to disc. Just create a folder that will serve as the parent directory of your DVD. I Like to name it after the title of the movie. Then you will use dvdauthor to create a title set and table of contents and no DVD menus. The movie will just play. :-)
mkdir MOVIE_TITLE
dvdauthor -o MOVIE_TITLE/ -t movie.mpg
dvdauthor -o MOVIE_TITLE/ -T
The dvdauthor -t option creates a title track in the VIDEO_TS directory. If you list the contents after running the first command, you’ll see the corresponding VTS_01_0.BUP, VTS_01_0.IFO, and VTS_01_X.VOB files. The -T option creates a table of contents for all title sets in the file system, which are listed as VIDEO_TS.BUP and VIDEO_TS.IFO.
You are now ready to burn the DVD. In the following command, we will use the -Z option to burn an initial session to the disc, the -dvd-video option to generate a DVD-Video compliant UDF file system, and the -V option to give the disc a Volume ID. This Volume ID is read by your computer to and displays as a nice human readable title typically underneath the icon representing the disc. The -dvd-video and -V options are actually part of the mkisofs (genisoimage) command sets, so they do not show up in the growisofs man pages.
growisofs -Z /dev/dvdrw -dvd-video -V MOVIE_TITLE MOVIE_TITLE/
Notice, you do not need to generate an ISO file to burn the DVD. This would only waste space if your intention is not to distribute or store the video as a disc image. To create the image however, that’s as easy as the following.
genisoimage -o MOVIE_TITLE.iso -dvd-video MOVIE_TITLE/
Posted by gmendoza on September 26, 2009 under Tech Tips |
If you have Matroska Video (MKV) files encoded with AC3 Dolby Digital 5.1 or DTS audio tracks, you may want to simply extract the audio, convert it to a 2-channel stereo format like WAV, MP3 OGG, etc, and then add it back into the MKV as a separate audio track. This is useful when your media player (e.g. Western Digital Media Player WDAVN00) will not downscale the audio from a digital format like AC3 or DTS to stereo when you don’t have a receiver or TV with a built in Dolby Digital decoder. Now you’ll have the choice of either audio format depending on your technical requirements.
The great thing about the Matroska multimedia container is that you can easily manipulate these files without having to re-encode, saving lots of time. I’ll be using mkvextract to extract the AC3 audio, ffmpeg to convert ac3 to mp3, and finally mkvmerge to add and remux the new audio track to the MKV container. All of these are available to a number of platforms, but in my examples, I’m using Linux. Check out the MKVToolnix and FFMpeg websites for more info on the software.
If using Ubuntu Linux, install the relevant mkvtoolnix, mkvtoolnix-gui and ffmpeg packages.
sudo apt-get install mkvtoolnix mkvtoolnix-gui ffmpeg libavcodec-unstripped-52
To view the existing tracks of the MKV, use the mkvmerge -i option. In the following example, you see my “Cool.Video.mkv” file has an MPEG4 video in track 1, an AC3 Dolby Digital audio file in track 2, and subtitles in track 3.
mkvmerge -i Cool.Movie.mkv
File 'Cool.Movie.mkv': container: Matroska
Track ID 1: video (V_MPEG4/ISO/AVC)
Track ID 2: audio (A_AC3)
Track ID 3: subtitles (S_TEXT/UTF8)
Using mkvextract, extract the AC3 Dolby Digital audio from track 2, saving it to a file called audio.ac3.
mkvextract tracks Cool.Movie.mkv 2:audio.ac3
Extracting track 2 with the CodecID 'A_AC3' to the file 'audio.ac3'. Container format: Dolby Digital (AC3)
Progress: 100%
ls -lh audio.ac3
-rw-r--r-- 1 gmendoza gmendoza 432M 2009-09-26 11:58 audio.ac3
Convert the 6-channel ac3 file to a 2-channel stereo MP3 using ffmpeg. If you prefer a higher audio bitrate, adjust the -ab value as desired. e.g. 256, 384, etc, and adjust the audio rate to your liking as well.
ffmpeg -i audio.ac3 -acodec libmp3lame -ab 160k -ac 2 audio.mp3
[output omitted for brevity]
ls -lh audio.*
-rw-r--r-- 1 gmendoza gmendoza 432M 2009-09-26 11:58 audio.ac3
-rw-r--r-- 1 gmendoza gmendoza 87M 2009-09-26 12:08 audio.mp3
To simplify things, you could actually skip the digital format extraction process by running ffmpeg against the MKV file directly.
ffmpeg -i Cool.Movie.mkv -acodec libmp3lame -ab 160k -ac 2 audio.mp3
If you prefer encoding with more advanced options, you could extract the audio as a 2-channel WAV file instead, and then process it with LAME, Oggenc, or some other encoder of your choosing. The following shows the extraction to WAV, and then conversion to various formats for fun, e.g. MP3, OGG, and FLAC.
ffmpeg -i Cool.Movie.mkv -acodec pcm_s16le -ac 2 audio.wav
lame -V0 -q0 --vbr-new audio.wav audio.mp3
oggenc -q6 audio.wav
flac audio.wav
Use mkvmerge to combine the original MKV with the MP3 audio track to create a new file called Cool.Movie.New.mkv. Make sure you have enough disk space for both the original and new MKV file.
mkvmerge -o Cool.Movie.New.mkv Cool.Movie.mkv audio.mp3
mkvmerge v2.4.1 ('Use Me') built on Dec 13 2008 21:03:46
'Cool.Movie.mkv': Using the Matroska demultiplexer.
'audio.mp3': Using the MP2/MP3 demultiplexer.
Warning: 'audio.mp3': Skipping 32 bytes at the beginning (no valid MP3 header found).
'Cool.Movie.mkv' track 1: Using the MPEG-4 part 10 (AVC) video output module.
'Cool.Movie.mkv' track 2: Using the AC3 output module.
'Cool.Movie.mkv' track 3: Using the text subtitle output module.
'audio.mp3' track 0: Using the MPEG audio output module.
The file 'Cool.Movie.New.mkv' has been opened for writing.
Progress: 100%
The cue entries (the index) are being written...
Muxing took 270 seconds.
Verify that the audio track has been added. You can see Track ID 4 has been successfully added.
mkvmerge -i New.Cool.Movie.mkv
File 'New.Cool.Movie.mkv': container: Matroska
Track ID 1: video (V_MPEG4/ISO/AVC)
Track ID 2: audio (A_AC3)
Track ID 3: subtitles (S_TEXT/UTF8)
Track ID 4: audio (A_MPEG/L3)
That’s really all there is to it. There are quite a few options available when editing MKV container files. For example, I wanted nice descriptions for my tracks since various media players will read and display them for you during menu navigation. I recommend using the mkvmerge gui application as shown in this screenshot.
It’s really just a front-end application to mkvmerge, and the following text shows the commands that were used to specify the language for each tag, re-order the audio tracks, disable subtitles by default, and give useful descriptions to each Track ID.
mkvmerge -o "Cool.Movie.New.mkv" \
--language 1:eng \
--track-name "1:Cool Movie (MPEG4)" \
--default-track 1:yes \
--display-dimensions 1:40x17 \
--language 2:eng \
--track-name "2:Dolby Digital 5.1 (AC3)" \
--default-track 2:yes \
--language 3:eng \
--track-name "3:English Subtitles" \
--default-track 3:no \
-a 2 -d 1 -s 3 Cool.Movie.mkv \
--language 0:eng \
--track-name "0:2-Channel Stereo (MP3)" \
--default-track 0:no \
-a 0 -D -S audio.mp3 \
--track-order 0:1,0:2,1:0,0:3
mkvmerge -i Cool.Movie.New.mkv
File 'Cool.Movie.New.mkv': container: Matroska
Track ID 1: video (V_MPEG4/ISO/AVC)
Track ID 2: audio (A_AC3)
Track ID 3: audio (A_MPEG/L3)
Track ID 4: subtitles (S_TEXT/UTF8)
Tags: AC3, Audio, Dolby Digital, FFMpeg, LAME, Linux, Matroska, MKV, mplayer, Multimedia, Video
